This strip slitting machine can not only cut the amorphous ribbon and noncrystalline ribbon, but can also cut other metal ribbons. Three parts of this slitting machine which as follows:
The uncoiled part: Unwinding spindle diameter is 75 mm, the unwinding roll has axial movement and longitudinal shift to ensure the strip into the slitting station without excursion.
The slitting part: The feeding guide table can be adjusted by up and down, left and right, front and back, which to ensure the position accuracy of the remove, besides, it is easy to operate.
The winding part: It adopts the biaxial winding mode, and it use the 100NM magnetic clutch to adjust the tension of the winding, which to ensure the strip re-winded in order.
Ribbon thickness: 0.02mm ~ 0.6mm
Maximum ribbon width: 220mm
Maximum OD of material: φ500mm
ID of material material : φ75mm
Maximum weight of material coil: 300kg
Minimum width of slitted ribbon: 2mm
Knife diameter: Φ130mm
Cutter shaft diameter: Φ60mm
Slitting speed: 10-90m/min
Slitting number: ≤12
Inner diameter of winding: Φ75mm
Max outer diameter of winding: Φ350mm.
Reducer: Gear reducer
NOTICE: The machine itself don’t include the cutter, the cutter need customized according to customer’s demand or customer can also buy it in their local country.
Request a Quote